Hearing Protectors
e.s. Knee Pad Ergonomic
- EN 388:2016, Mechanical risks, 3133X
- In calf's leather
- Very soft but also strong
- Application areas: For medium to heavy-duty work in the construction, warehousing and transport sectors
- Length: approx. 26.5 cm
- Size 10
Important: The assessment is not a legally binding statement about the actual application suitability. For thisplease refer to the respective EN standards with the test code of the various gloves here in the text of the details screen.
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number (shown with an X below the icon in the example), the better the test result.
Grain leather, also called full leather, is the upper most valuable layer of the leather. It is the former fur side of the skin and can be recognised by its natural smooth surface that makes it resistant to oils, grease and wet. It is also very strong and supple. This means that the sturdy, very wear-resistant grain leather is ideal wherever dexterity is required. Gloves made of upholstery leather are also produced from grain leather.
- Wear-resistant
- Sturdy and tear-proof
- Good mechanical protection
- For heavy-duty work
Price
Available sizes
Glove application recommendation
Glove total length
Material / coating
Protection standard
Special properties
Extras
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number (shown with an X below the icon in the example), the better the test result.
Grain leather, also called full leather, is the upper most valuable layer of the leather. It is the former fur side of the skin and can be recognised by its natural smooth surface that makes it resistant to oils, grease and wet. It is also very strong and supple. This means that the sturdy, very wear-resistant grain leather is ideal wherever dexterity is required. Gloves made of upholstery leather are also produced from grain leather.
- Wear-resistant
- Sturdy and tear-proof
- Good mechanical protection
- For heavy-duty work
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number (shown with an X below the icon in the example), the better the test result.
Grain leather, also called full leather, is the upper most valuable layer of the leather. It is the former fur side of the skin and can be recognised by its natural smooth surface that makes it resistant to oils, grease and wet. It is also very strong and supple. This means that the sturdy, very wear-resistant grain leather is ideal wherever dexterity is required. Gloves made of upholstery leather are also produced from grain leather.
- Wear-resistant
- Sturdy and tear-proof
- Good mechanical protection
- For heavy-duty work
Thermal risks
One faces a number of thermal risks at work. For the protection effect of the gloves it is important to differentiate between ambient heat or direct contact with hot objects. Risks are also involved when faced with extreme heat caused by fires, radiation etc.
Heat protection gloves should have wear resistance properties and also a certain level of cut resistance. The minimum wear and tear resistance according to EN 388 is specified for protection gloves of the EN 407.
Fire-resistant and heat-resistant protection gloves from Engelbert Strauss offer day-to-day safety at work.
Testing Criteria:
Flammability: 0-4
Contact Heat Resistance: 0-4
Convective Heat Resistance: 0-4
Radiant Heat Resistance: 0-4
Resistance to small drops of molten metal: 0-4
Resistance to large quantities of molten metal: 0-4
The higher the number (shown with an X below the icon in the example), the better the test result.
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number (shown with an X below the icon in the example), the better the test result.
Grain leather, also called full leather, is the upper most valuable layer of the leather. It is the former fur side of the skin and can be recognised by its natural smooth surface that makes it resistant to oils, grease and wet. It is also very strong and supple. This means that the sturdy, very wear-resistant grain leather is ideal wherever dexterity is required. Gloves made of upholstery leather are also produced from grain leather.
- Wear-resistant
- Sturdy and tear-proof
- Good mechanical protection
- For heavy-duty work
Heat protection gloves made of leather combine the positive properties of a natural product with good heat protection. Leather is breathable and comfortable on the skin. It is also very wear-resistant. The protective properties, in particular against splashing metal and heat, make leather gloves suitable for a number of tasks.
