Hearing Protectors
e.s. Knee Pad ErgonomicPlease choose a delivery country
Country
Language
Currency
- EN 388:2016, Mechanical risks, 2341X
- EN 407:2020, Thermal risks, X1XXXX
- DuPontTM Kevlar® fine knit with black spot nubs on both sides
- Seamlessly woven, reversible
- Application areas: ideal for working with hot and sharp small parts
- Length: approx. 27 cm
COLOUR CODING SYSTEM
One wristband colour for each size
Many helping hands at work? Excellent!
With the coloured marking on the wristband of our gloves, every employee quickly finds their correct size. Practical also for large orders for quick and clear storage of different sizes.
Important: The assessment is not a legally binding statement about the actual application suitability. For thisplease refer to the respective EN standards with the test code of the various gloves here in the text of the details screen.
KEVLAR®
- Very good cut protection
- Flame-retarding
- Very high tensile strength (5x higher than steel)
- Non-melting, very high temperature resistance
- High tear resistance
- High wear resistance
DuPont™ Kevlar® are registered brands and trademarks of E.I. DuPont de Nemours and Company.
The gloves made of DuPont™ Kevlar® offer excellent protection. The high-quality artificial fibres are extremely wear-resistant, tear-resistant and protect against heat and cuts. Thanks to the low heat conductivity, the hands are well protected even in extreme temperatures.
Thermal risks
One faces a number of thermal risks at work. For the protection effect of the gloves it is important to differentiate between ambient heat or direct contact with hot objects. Risks are also involved when faced with extreme heat caused by fires, radiation etc.
Heat protection gloves should have wear resistance properties and also a certain level of cut resistance. The minimum wear and tear resistance according to EN 388 is specified for protection gloves of the EN 407.
Fire-resistant and heat-resistant protection gloves from Strauss offer day-to-day safety at work.
Testing Criteria:
Flammability: 0-4
Contact Heat Resistance: 0-4
Convective Heat Resistance: 0-4
Radiant Heat Resistance: 0-4
Resistance to small drops of molten metal: 0-4
Resistance to large quantities of molten metal: 0-4
The higher the number (shown with an X below the icon in the example), the better the test result.
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number (shown with an X below the icon in the example), the better the test result.
- Good grip
- Wear-resistant
- Breathable
- For fine and rough work
Price
Available sizes
Glove application recommendation
Glove total length
Material / coating
Protection standard
Special properties
Extras
KEVLAR®
- Very good cut protection
- Flame-retarding
- Very high tensile strength (5x higher than steel)
- Non-melting, very high temperature resistance
- High tear resistance
- High wear resistance
DuPont™ Kevlar® are registered brands and trademarks of E.I. DuPont de Nemours and Company.
The gloves made of DuPont™ Kevlar® offer excellent protection. The high-quality artificial fibres are extremely wear-resistant, tear-resistant and protect against heat and cuts. Thanks to the low heat conductivity, the hands are well protected even in extreme temperatures.
Thermal risks
One faces a number of thermal risks at work. For the protection effect of the gloves it is important to differentiate between ambient heat or direct contact with hot objects. Risks are also involved when faced with extreme heat caused by fires, radiation etc.
Heat protection gloves should have wear resistance properties and also a certain level of cut resistance. The minimum wear and tear resistance according to EN 388 is specified for protection gloves of the EN 407.
Fire-resistant and heat-resistant protection gloves from Strauss offer day-to-day safety at work.
Testing Criteria:
Flammability: 0-4
Contact Heat Resistance: 0-4
Convective Heat Resistance: 0-4
Radiant Heat Resistance: 0-4
Resistance to small drops of molten metal: 0-4
Resistance to large quantities of molten metal: 0-4
The higher the number (shown with an X below the icon in the example), the better the test result.
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number (shown with an X below the icon in the example), the better the test result.
- Ideal heat protection
- Cut protection
- Seamless
KEVLAR®
- Very good cut protection
- Flame-retarding
- Very high tensile strength (5x higher than steel)
- Non-melting, very high temperature resistance
- High tear resistance
- High wear resistance
DuPont™ Kevlar® are registered brands and trademarks of E.I. DuPont de Nemours and Company.
The gloves made of DuPont™ Kevlar® offer excellent protection. The high-quality artificial fibres are extremely wear-resistant, tear-resistant and protect against heat and cuts. Thanks to the low heat conductivity, the hands are well protected even in extreme temperatures.
Thermal risks
One faces a number of thermal risks at work. For the protection effect of the gloves it is important to differentiate between ambient heat or direct contact with hot objects. Risks are also involved when faced with extreme heat caused by fires, radiation etc.
Heat protection gloves should have wear resistance properties and also a certain level of cut resistance. The minimum wear and tear resistance according to EN 388 is specified for protection gloves of the EN 407.
Fire-resistant and heat-resistant protection gloves from Engelbert Strauss offer day-to-day safety at work.
Testing Criteria:
Flammability: 0-4
Contact Heat Resistance: 0-4
Convective Heat Resistance: 0-4
Radiant Heat Resistance: 0-4
Resistance to small drops of molten metal: 0-4
Resistance to large quantities of molten metal: 0-4
The higher the number (shown with an X below the icon in the example), the better the test result.
Mechanical risks
Protection gloves of this standard need to protect against physical and mechanical loads such as wear, cuts, puncturing, tearing or felling cuts. These loads can occur when working with metal or wood or any other tasks where hands need to be protected against mechanical injury. Also, they must comply with the regulations relating to electrical conductivity of protection gloves.
Protection gloves for mechanical risks must satisfy at least one of the test criteria listed in the table.
Testing Criteria:
Abrasion Resistance: 0-4
Cut Resistance: 0-5
Tear Resistance: 0-4
Puncture Resistance: 0-4
EN-ISO cut resistance: A-F
EN impact protection: yes/no
The higher the number (shown with an X below the icon in the example), the better the test result.
- Ideal heat protection
- Cut protection
- Seamless
